NEW IN THE LATEST VERSION OF THE ABRITES DIAGNOSTICS FOR PEUGEOT/CITROËN ONLINE

In the latest version of the Abrites Diagnostics for Peugeot/Citroën we have added more models to the supported vehicles' list for standard diagnostics and advanced procedures.

Now the latest 2021+ PSA and Opel models have been added for PIN reading, mileage recalibration and BSI exchange:
• Peugeot 208 II
• Peugeot 308 II
• Peugeot 3008 II
• Citroën C4 Cactus
• Citroën Berlingo
• Citroën Partner
• Toyota ProAce
• Opel Grandland
• Opel Crossland
• Opel Mokka
• Opel Vivaro
• Opel Combo
These functionalities are accessible via the PN017 and PN018 licenses.
As for general diagnostics, we have added the following models in the Abrites Diagnostics for PSA:
• Peugeot P308 III
• Citroën C3 IV
• Citroën C5 X
• Opel Astra
• Opel Movano
• Opel Rocks-e

NEW FUNCTIONALITY FOR BMW F-SERIES VEHICLES

We are extremely proud to present a ground-breaking solution in the world of BMW F-series vehicles equipped with a BDC module - key programming using ONLY an OBDII connection!
Removing the BDC module is NO LONGER required, and the procedure now takes a much shorter time than ever!
Both spare key programming and ALL KEYS LOST situations will be covered by this functionality

ABRITES DIAGNOSTICS FOR PORSCHE ONLINE 34.1

The latest version of the Abrites Diagnostics for Porsche Online we have added support for Porsche SDI7 ECUs. With version 34.1 you can now read the 16 Component Security bites of the ECU, which can be used for module adaptation. In order to access these functionalities, you will need thePO009 license and active AMS

Download the latest software version and update!

THE NEW ABRITES SOLUTION FOR RENAULT MILEAGE RECALIBRATION - RR025

Our team is happy to present the latest development for Renault vehicles, the RR025 mileage recalibration license. It supports the following models:

• Clio V/ Captur II
• New Zoe

The RR025 is used for the following procedures:
• Instrument Cluster replacement
• ABS/ESC replacement
• Mileage recalibration in IC and ABS

It is a versatile license which allows mileage recalibration by diagnostics in Visteon instrument clusters (both variants - Low Line and High Line), and by dump in Calsonic Kansei instrument clusters (with mechanical pointers). It also allows independent reset to 0 by diagnostics in ABS BOSCH UDS.
When performing these procedures, you will need the new CB021 cable set, or the CB012 if you already have one.
Make sure you download and install the latest version of the Abrites Diagnostics for Renault Online 34.1 in order to access these functionalities. Active AMS is also required to use the new license.

ABRITES DIAGNOSTICS FOR MERCEDES-BENZ TRUCKS NOW AVAILABLE!

We are happy to announce the launch of the Abrites Diagnostics for the Mercedes-Benz truck range!

The standard diagnostic capabilities of the software include:
• Module scanning
• Module identification
• Reading and clearing of DTCs
• Live data monitoring

Besides these functionalities included in the basic AVDI package, we also offer a brand-new Mercedes-Benz truck license - the MN031, allowing key programming and module replacement, as well as a proprietary key - the TA69. Make sure to download and install the latest version of the Abrites software.

ABRITES DIAGNOSTICS FOR BMW ONLINE 34.1 - KEY PROGRAMMING FOR BMW MOTORCYCLES

In the latest version of the Abrites Diagnostics for BMW, we have added support for a new model of motorcycles.
The BMW R-model Ninet K32 series (R Ninet Racer) has now been added for key programming. This model is the new addition to the vast list of supported BMW bikes, which include:

C650 GT
S 1000 RR
S 1000 R
S 1000 XR
R 1200 GS
R 1200 GS Adv.
R 1200 RT
R 1200 R
R 1200 RS
K 001
K 1200 R
K 1200 S
K 1300 R
K 1600 Bagger
F 750 GS
F 800 GS
F 850 GS
F 850 GS Adv.
F 900 R
F 900 XR
R nineT
R nineT Pure
R nineT Scrambler
R nineT Racer
R nineT Urban G/S

Make sure your AMS is active and you download and install the latest software version 34.1 in order to access the new functionalities. In order to perform these procedures, you will need the BN013 and BN012 licenses.

THE ALL-NEW ABRITES DAS MANAGER FOR TRUCKS - MN031

The Abrites Team has been hard at work the last several months to bring you the first products of the Mercedes-Benz truck range. One of them is the all-new Abrites DAS Manager for trucks - the MN031 license.
WIth the MN031 you will be able to perform key programming and module replacement procedures on an array of models.
The main functionalities of the Abrites DAS Manager for trucks include:

• Spare key programming
• ALL KEYS LOST

for all trucks with infra-red keys up to 2021

• Module replacement - EZS, ECU (MCM), TCM modules
    - Module reset (virgin)
    - Read/write coding
    - Personalisation
    - Activation

Supported vehicles include, but are not limited to:
• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos
• Mercedes-Benz Axor
• other vehicles from the range

For the key programming procedures, the newly launched ZN003 PROTAG Programmer is required. This next-generation Abrites key and transponder programmer has a designated slot for Mercedes-Benz truck keys, so that comfort and efficiency are maximized.

NEW: ABRITES KEY FOR MERCEDES-BENZ TRUCKS!

We are happy to present the latest Abrites key: TA69.
This world first product has been specially designed, developed and manufactured in the Abrites production facility to meet the professional locksmiths' needs. This key can be used when programming a spare key or in All Keys Lost situations for the following models of the Mercedes-Benz truck range using infra-red keys:

• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos
• and more!

This key works at 433 MHz frequency and comes in a plastic key shell (no mechanical key blade included).
The TA69 requires the latest license for Mercedes-Benz: the MN031 and the new generation PROTAG: the ZN003.

THE NEXT-GENERATION PROTAG IS HERE!

We are happy to present to you the new and improvedPROTAG V2 - the ZN003!

PROTAG V2 is the next-generation key and transponder programmer by Abrites.
It now has a 2-in-1 slot ergonomically shaped for different types of Infra-red keyssuch as the brand new Abrites Mercedes-Benz Actros truck key TA69which is shaped like the original truck keys and fits perfectly in the ZN003 when programming.
Moreover, the ZN003 is now battery powered with an option for USB type C connectivity. It is also Bluetooth-ready, with the suitable software for using its bluetooth connectivity on the way.


PROTAG V2 is faster, smaller, lighter and more versatile than the previous generation- the ZN002.The full functionality of the ZN002 is transferred and enriched in the ZN003 iteration,and the support for the ZN002 will continue as before.

ABRITES DIAGNOSTICS FOR VAG VERSION 41.3

In the new version of the Abrites Diagnostics for VAG Offline, we present a new solution regarding the adaptation of ZF8HP gearboxes.
In version 41.3 of the Abrites Diagnostics for VAG Offline, we have included the possibility to read component security bytes from ZF8HP gearboxes, which allows TCU replacement.
Тhis functionality is free for all owners of the vn002 license and active AMS
In this version we have also improved the decryption of dumps from EDC17/MED17 ECUs with TC1724/TC1782 (mostly used in vehicles with petrol engines equipped with MED 17.5.25, MED 17.5.5, etc. ECUs). This allows the extraction of Component Security bytes from the ECU.

NEW IN THE LATEST VERSION OF THE ABRITES ECU PROGRAMMING TOOL

In the latest update of the Abrites ECU Programming Tool all users will be able to read and write DQ381/ZF8HP gearboxes' Maps and DFlash. This is incredibly useful in TCU replacement procedures. In order to access this functionality EP001 is required (or VN004 legacy license), as well as the CB401 cable, which is part of the ZN051 Distribution Box for reading ECUs on bench.
What's more, now you can write DFlash and perform checksum calculation for MG/MD ECUs, which is very useful when modifying these control units. Also, reading Bosch MG/MD ECUs is now faster and easier: it will now take no more than 10 minutes!

NEW IN THE LATEST VERSION OF THE ABRITES DIAGNOSTICS FOR HYUNDAI/KIA ONLINE

We are happy to announce that we have expanded the standard diagnostic capabilities of the Abrites software for Hyundai/KIA.

In the latest version 34.0, you are able to view live data and perform actuator testing for ALL vehicles 2001-2022.

Stay tuned for upcoming exciting announcements, since we are currently working on new special functions for Hyundai/KIA which will unlock even more opportunities for you!

MORE FUNCTIONALITIES NOW AVAILABLE IN THE BASIC AVDI PACKAGE!

We are happy to announce that we are adding even more FREE functionalities for all AVDI users with active AMS!

From now on, you can access a selection of ANxxx licenses (legacy functionalities) with the basic software. These solutions allow key programming and mileage calibration, as well as facilitate module replacement in VAG Immo III and III+ vehicles. This goes for the following special functions and licenses:

AN002 and AN003 - reading CAN TP2.0 dashboards 2003-2008.
They are used for PIN/CS reading, mileage calibration on these dashboards in all VW/Seat/Skoda 2003-2008 (Immo III/III+ cars). This functionality is mainly used for preparing keys and mileage calibration.
AN004 - Allows to manually change the Immo data for the modules above. This can be used to adapt a dashboard (immobilizer) for all VW/Seat/Skoda 2003-2008 (Immo III/III+ vehicles).
AN005 - Used for new ECU adaptation in Immo III (excluding Immo III+) through adaptation by diagnostics on channel 50.
AN006 - Allows reading EEPROMs on dashboards that use K-Line protocol. These are all 1998-2003 dashboards (VDO, Magneti Marelli, Motometer, on VW/Seat/Skoda), as well as Bosch RB4/RB8 dashboards (RB4 - 2001-2004 VW Golf/Audi A4, RB8 - Audi A4 2004-2008) . You can extract PIN/CS to program keys and calibrate mileage.
AN007 - Used for reading the EDC15 (2000-2004) and ME7 (2000-2006) ECUs.
Also, extracting CS/PIN which can be used for key learning and module replacement (through adaptation by diagnostics on channel 50).
AN010 - Allows reading the EEPROM of Airbags that use the K-Line protocol (1997-2004).
AN012 - Allows odometer replacement on EDC16 (2004-2008).
AN014 - Used for EDC17 PIN reading (excluding CS) - used for programming dealer keys (excluding preparing) for EDC17/MED17 2007-2010.
AN018/AN019 - Allows reading EEPROM of EZS-Kessy on Audi 4F (A6 2003-2008, Q7 2005-2008). Used for extracting PIN/CS and key programming for these vehicles.
AN021 - Used for reading the ME7 EEPROM via CAN protocol. These ECUs are used in vehicles such as the Audi TT 2003-2010. This functionality allows extracting the PIN/CS, which are used for key programming.
AN023 - Used for Crafter Key programming in vehicles 2006-2012 equipped with EDC16.
AN024 - Allows key programming for all Immo III/III+ vehicles, if PIN/CS is known (can be read with one of the other licenses) and a dealer key is present.
АN025 - Allows reading the PIN/CS from EDC16/MED9/Simos PPD/Simos 7.x ECUs.
AN026 - Used for dealer key preparation and programming (for all Immo III/III+ vehicles). It is used to find the 7th byte of the Immobilizer (if the Component Security bytes from the ECU can be read).
AN027 - same as AN018/19, but extended to A6 2003-2010, Q7 2005-2014.
AN028/AN029 - Allows UDS Dashboard Reading - VDO 2008-2015, JCI 2008-2012, Magneti Marelli 2006-2014. These are all used in VW/Seat/Skoda 2008-2013, as well as Audi A1/Q3. It is used to calibrate mileage and program keys (spare key and All Keys Lost).

What’s more, now the special functions for JLR - JL003 and JL004 will be available to every AVDI user with active AMS. This means that mileage calibration and key programming for Jaguar and Land Rover vehicles up to 2018 is now part of the basic AVDI software.

• Spare key programming
• ALL KEYS LOST key programming
• Remote control and keyless programming are part of the procedure, so no extra steps are required.

Supported models for key learning are equipped with the following KVM types:
• DPLA
• FK72
• HPLA

Supported models for mileage recalibration (including but not limited to):
Land Rover
• Evoque (L538) - LL and HL (2- and 4-door models)
• Range Rover Sport (L494)
• Range Rover (L405) (including long wheel base)

Jaguar
• F-Type Convertible and Coupe
• XF (X250)
• XJ (X351)
• XK (X150)
• XKR (X150)

The FN012 special function now also becomes a part of the basic AVDI package. This means that the following is available For FCA vehicles up to 2012 without the need for additional purchases:

• Key programming by OBDII
• Transponders/Keys preparation by dump of Immobilizer
• BCM – Configuration data read and update, PIN, component protection data
• BCM Read/Update ConfData by OBDII

Supported models for key programming:
• Fiat, Alfa, Lancia – Alfa 147, Mito; Fiat 500, Bravo, Grande punto, Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta.

Supported units:
• BCM Delphi (93C66) – NOTE: PIN Code is required!
• BCM Marelli (912DG128, 3K91D)
• BCM Marelli (9S12DG256, 1K79X)
• BCM Marelli (NEC 70F3237/70F3378,95160)
• BCM Marelli (NEC 70F3633,95320)
• BCM Siemens (9S12DG128)

THE ABRITES KEY INSPECTOR -20 % ALL THROUGH SEPTEMBER 2022!

Our Team is happy to inform you that one of the most powerful Abrites tools, the Key Inspector is now available at a 20 % discount all through September!

The KT011 is a software license that enables you to read ALL AVAILABLE DATA from a key. We are talking Vehicle Identification Numbers, key type, vehicle type, date of last drive, fuel in the tank, and even in some cases, mileage (if stored in the key), as well as date of first registration of the vehicle (BMW HITAG2 keys) and registration plate (Renault HITAG2 keys).

• Key type
• Vehicle Identification Number (VIN)
• Vehicle colour code
• Vehicle Type
• Time and date of last drive
• Battery voltage
• Quantity of fuel in the tank
• Mileage stored in the key
• and more!

The KT011 is an invaluable tool for insurance professionals and law enforcement officials. The possibility of accessing this much information only from a key is incredibly helpful in various investigations and expert analyses. In order to use the KT011, you will need the Abrites protag programmer - our tool that is dedicated to all key and transponder-related operations with proprietary and original keys.