Toyota/Lexus/Scion Key Lerning Device

Key programming for vehicles with Smart Access Systems by OBD Support 2015+

Device has two options

• Master key emulation: Program slave keys, smart key and Transponder Emulator (ZN039) to the vehicle.
• Emergency start: Device is connected with a transponder Emulator to start the vehicle, using the built in emergency start functionality so that it can be taken to the nearest service point.

Direct key programming, no need to reset master keys, available for vehicles based of DST40 and DST80 vehicles with smart keys
NO MORE REMOVING OR OPENING THE ECU.
Supported ECUs (1ND-TV-EDC15 1.4 D4D, 4ZZ-FE 1.4, 1KR-FE 1.0, 1NR-FE 1.33, 1SZ-FE 1.0)
Covered Toyota models : Corolla, Yaris, Auris, iQ, RunX 140, Echo, Verso S, Urban Cruiser
Tool has been tested on European vehicles only, device is currently testing on vehicles from other regions of the world.

ZN041/42/43 Abrites cable/adapter set

Cable set consisting of Abrites main connector cable, Abrites fuse plug, Abrites switch relay cable, Abrites CAN H (High)/CAN L (Low) Connectors, Abrites LIN Connector, OBDII Y-connector and 3-way D-SUB 25 connection box. Used to facilitate key password extraction as well as module virginization in FBS2/FBS3 Mercedes-Benz vehicles. Works in connection with MN026 special function.

New Renault All In One

Renault K-Line + CAN Key/Card Programming Device (Version All in one)

Device can recognize the car type automatically and learn a new key or card via OBD-II socket.

No PC No Immobilizer pin code needed, the device will read the pin code from the Immobilizer and will enter it directly by OBD.

Lockfest 2016

We would like to announce our participation in the upcoming Lockfest 2016 fair

The fair is going to take place in Karlovy Vary on 24 September - 25 September 2016 at HOTEL THERMAL.
You are welcome to visit us @ our stand numbers 47 & 48 .

ONCE THE BMW/MINI is updated, it is not possible to program a new key by DUMP or by OBD.

L7 supports all E series from 2004 Up to latest version of ISTA till present date August 2016 .

Device has auto detect protocol, if the CAS version up to ISTA 44, device need 15 seconds to learn a new key or a normal 7936 transponder.

If the CAS is blocked with encrypted version ISTA 45+ Device will AUTOMATICALLY read the (ISN) From the CAS, ECU And Transmission and learn a new key or prepared transponder in 8 min.

Short description:

Read/Write MB PLD(MR) Flash, EEPROMs by OBD2 or DirectConnect cable;

Read/Write MCM (ACM) memory over DirectConnect cable;

Read/Write MB FR by OBD2 or DirectConnect cable (new function!);

Read/Write MAN FFR by OBD2 or DirectConnect cable (new function!);

Read/Write FLASH & EEPROMs of CRV1 & CRV2 engine control unit of MB S, ML, GL class by OBD2 (new function!);

Read/Write FLASH & EEPROMs of CDI engine control unit used in MB V-klass, Sprinter and Vito (new function!);

MB Learn key by OBD2 or DirectConnect cable;

Immobilizer ON/OFF for MB by OBD2 or DirectConnect cable;

Calculate VEDOC, FDOK codes, DAS password for MB by OBD2;

DirectConnect cable;

Read/Erase fault codes;

Full Fault errors report;

Speed limit. Applicable for CPC drive control modules

NOx torque limit. FR and CPC

Erase exhaust faults (AdBlue system fault source repair must be done firstly)

Includes hardware: VEI device, DirectConnect cable, MCM adapter, MAN and MB adapters, FR and FFR adapters, USB cable.

Includes licenses: MB MEMO, MB KEYS, MAN KEYS, MB CALC, 2011+, 3CORE, CRV, CR, FR, DC, DIAG, EXTRA.

Truck Evo available in several languages:

• English
• Dutch
• French
• Spanish
• Portuguese
• Russian
• Lithuanian
• Arabic
• Persian

Support and updates for 12 months is included.

Click here for more info

Includes all odometer correction software until today plus:
- 1 x Can-gateway BMW
- 1 x Can-gateway EASY
- 1 x Can-gateway OBDII
- 1 x Can-gateway MB/Renault

Update new functions FREE till September 2016 Only

FOR DP3 UPDATE INFO CLICK HERE

- Mb nec full or Mb SSC new free function can calculate ALL EIS FORMAT Types in the market in on click OFFLINE
If you have any Mb tool from other supplier, our MB NEC Full or MB NEC SSC Can calculate and program the ESL/Emulator.

-Grey key improvement

To use the updated MB NEC All in one, please follow the below steps:
1- Delete or replace the existing Mercedes_Tool Software on your PC WITHOUT deleting the Mercedes Tool Key FILE
2- Download the new Mercedes_Tool Software from the following link : Click here to download

- Range, Jaguar, Ford, Volvo HU101 Decoder is ready (Click here)
- Opel Chevrolet HU100 Decoder is ready (Click here)
- SIP 22 Alfa/Fiat/Lancia/Iveco sip 22 Decoder is ready (Click here)
- BMW Turbo Decoder for F-Series (Click here)

Visit us at Automechanika Dubai-from 8, 9 & 10 May 2016 at WTC -(world trade center)- Sheikh Rashid Hall stand number -SR-D24.

New version OBD Tool improvement

To use the updated MB NEC All in one, please follow the below steps:
1- Delete or replace the existing Mercedes_Tool Software on your PC WITHOUT deleting the Mercedes Tool Key FILE
2- Download the new Mercedes_Tool Software from the following link : Click here to download

DK3 dealer key learning device by dump

Bmw /Mini/ Rover /Range Rover/ Rolls-Royce/ Phantom/Porsche 911/Cayenne and Panamera

Device Can Program New Or Used Keys For Ews 1/2/3/3+ And Ews 4
It Programs Cas 1/2/3/3+/4 And Cas 4+ And All Porsche Even The New Cayenne/ Panamera And The New 911
Our Device Is The Only Device In The World That Can Do Cas4+ And New Porsche

New version V.1.0.7.3

Click here to download the software and the installation manual

NEW RANGE ROVER /LAND ROVER / JAGUAR KEY LEARNING DEVICE BY OBD II 2010-2016

2015 (SDD V.141.04 Plus) All JLR vehicles have a new software update, which makes their Keyless vehicle modules (KVM) READ ONLY.
If the owner lost all his keys or requires additional key, the KVM should be replaced.

New update for JLR standalone key programmer ready to cover latest versions that support CAN based models from 2010 up to 2016 FK72 Versions of KVM Without exchanging the KVM.

Programmer needs 15 to 25 seconds to learn a new key.

Range Rover sport - 2010 -2016+
Range Rover mark III - 2010 -2016+ 
Range Rover mark IV- 2010 -2016+
Range Rover E vogue 2012-2016+

Land Rover Discovery IV-2010 -2016+
Land Rover Freelander II- 2012-2016+
Jaguar XF - 2010-2016+
Jaguar XJ - 2010 -2016+

FREE PC SOFTWARE THAT HAS MANY FREE FUNCTIONS

• Renew used keys and reprogram them to the vehicle
• Replace faulty lost keys and add new keys 
• Software can update the device so no need to resend us the device for future update

Click here to download

FREE JLR ADAPTER 
Click here to see

2016 Videos will available soon!

To use the updated MB NEC All in one, please follow the below steps:
1- Delete or replace the existing Mercedes_Tool Software on your PC WITHOUT deleting the Mercedes Tool Key FILE
2- Download the new Mercedes_Tool Software from the following link : Click here to download

3- Unzip it, and copy the Mercedes_Tool Software to the same folder of the Mercedes Tool Key FILE You can use the new ALL IN ONE new version for fast key calculation (SKC Dongle required)

SKC Key Calculator Manual 

(Download Manual as PDF)

NEW Mercedes SKC Simon Key Calculator works with SKC software and with MB ALL IN ONE software, Device can calculate keys in seconds.

No longer need to wait 10 min for EIS dump key calculation.
Price: 200$ 

(Download MB SKC Software)

Download MB SKC Key Calculator Manual

Do not miss Simon Touch Christmas Promotion! Buy our Mercedes Key Programmer Full (4000 Euro) or Pro (1500 Euro) today! Pay 50% on purchase and the rest 50% after 6 months.

P.S: Promotion Valid from 15 December to January 5

BMW HU100R F Series -> 600 Euro
BMW Mini HU92 ->400 Euro
VAG HU66 EVO -> 400 Euro
Opel Chev HU100 -> 400 Euro
Fiat, Citroen, Peugot, Alfa, Lancia, SIP22 -> 400 Euro

P.S: Promotion Valid from 15 December to January 5

10% discount on all Stand alone devices!

P.S: Promotion Valid from 15 December to January 5

We are pleased to announce that the Christmas promotion will be held from 04 to 22 December 2015.

The promotional offer will include:

• AVDI interface included basic diagnostic functions, PassThru driver (J2534) and VCI emulator + Abrites Tough Case(ATC01 - Small size) + Special functions for VAG (AN043,AN044,AN045,AN048,AN049,AN050,AN054,AN055,AN057,AN059,TAG programmer ZN001) - 7200 euro 

• AVDI included basic diagnostic functions, PassThru driver (J2534) and VCI emulator + Abrites Tough Case (ATC01 - Small size) - 600 euro 
• 20 % discount on all special functions.

PS: The last payment day will be on 22 December 2015

• STMB023 / EIS Odometer correction by OBD AND BY CAN Function is tested one NEC EIS 2009 UP TO 2013 Price 200 euro
• STMB024 / EIS Odometer reset to zero by OBD AND BY CAN Function is tested one NEC EIS 2009 UP TO 201 Price 200 euro
• STMB023 and STMB024 Together at 300 euro.

To use the updated MB NEC All in one, please follow the below steps:

1- Delete the existing Mercedes_Tool Software on your PC WITHOUT deleting the Mercedes Tool Key FILE

2- Download the new Mercedes_Tool Software from the following link: Download here

3- Unzip it, and copy the Mercedes_Tool Software to the same folder of the Mercedes Tool Key FILE

1- MB NEC ESL V3 Fast renew, covers all NEC ESL/ELV Versions.
2- MB IR Programmer - read / erase / program / read password from BE/EB/China keys/non-OEM All versions.
3- MB EIS OBD Tool, read all EIS types including 212 / 166 all versions by OBD / CAN.
4- Personalize all EIS types Via IR (NO STAR DIAGNOSE NEEDED)
5- 7G CAN / OBD Tool
6- ISM CAN / OBD Tool

* FREE MB IR KEY PROGRAMMER UPDATE 24/09/2015

DIAGPROG4 + MERCEDES W205, W222, W447 - NOW ON SALE!!!

Due to upcoming launch of DiagProg4 diagnostic tester, we would like to invite all clients to purchase DiagProg4 diagnostic tester with selected software package for Mercedes at promotional price:

Terms & conditions:* 
1. DiagProg4 – Mercedes 2015**– Promotional price 499,00 euro !!!
2. Selected Mercedes program– Check the list of available programs and choose suitable one for your needs.

* CanGateway is required
**DiagProg4 – Mercedes 2015 – Package includes DiagProg4 diagnostic tester, small carrying case, test adapter, Power supply adapter from a cigarette lighter, set of cables required to work with selected software package, CD with software and instructions (pdf).
Promotion runs between 05. August .2015 and 31.August 2015 or while stock lasts. Please note that the number of devices is limited. All prices are gross (VAT tax is included) and in EURO currency. Prices do not include shipping costs.
* For all DiagProg3 users who decide to purchase DiagProg4 diagnostic tester there will be an option at a later time to transfer license from Diagprog3 device to DiagProg4 device provided that they will return DiagProg3 to Dealer or Elprosys company within a specified period of time.

Includes all odometer correction software until today plus:

1 x Can-gateway BMW

1 x Can-gateway EASY

1 x Can-gateway OBDII

1 x Can-gateway MB/Renault

Update new functions FREE till September 2016 Only

CanGateway MB Easy and OBDII

New update for R/L/J stand alone key programmer ready to cover latest versions that support CAN based models from 2010 up to 2015.
Programmer needs 15 to 25 seconds to learn a new key if the is no fault codes in the air transmitting of the signal from the intelligent key module.
If there is a fault, device need 25 seconds to clear the fault and learn a new key.
Device program the maximum of 8 keys in the immobilizer module memory.

Mb SSC new free function can calculate ALL EIS FORMAT Types in the market.
If you have any Mb tool from other supplier, our MB NEC Full or MB NEC SSC Can calculate and program the ESL/Emulator.

NO MORE TOKENS/ NO MORE WAITING FOR ESL DUMPS!!!!!
New (SSC) Mercedes ESL/ELV/EVL Dump calculator and programmer is ready.
Device can calculate any EIS Dump to program ESL OR Emulator in one second.
It doesn't matter from where you bought the MB KEY Programmer.
(SSK) Compatible with ALL FORMAT DUMPS That are in the market! 
In one click, load any EIS Format dump and program the ESL/ Emulator in one second.

New EVO VAG HU66/Generation 2/3 was produce in totally different hardware to open all new HU66 Lock easier and faster.
The new tool works same like BMW/MINI HU92.
No need have a locksmith skills to use the new EVO VAG HU66.